This article describes some simple and affordable recipes for original glass putties. These putties have good plasticity. The variants of homemade putties suggested in this article adhere firmly enough to the surfaces to be treated, and give little shrinkage during curing and react little to external temperature.
Chalk putty:
This is the simplest but quite effective glass putty.
| Substance | Parts |
| Olifa | 22 |
| Ground chalk | 84 |
Chalkless chalk putty:
You need to separately mix chalk and lime, and prepare a mixture of resin and liquid glass. After that both compositions should be mixed and add sand and kerosene then simply bring the putty to the desired thickness.
| Substance | Parts |
| Ground chalk sifted | 5 |
| Sifted lime | 0,3 |
| Fine sand | 2 |
| Liquid Glass | 0,3 |
| Wood resin | 2,2 |
| Kerosene | 0,5 |
Gypsum non-lipid putty:
Вам необходимо повторить всё тоже самое что и в прошлом варианте: смешать гипс с известью, и приготовить смесь смолы с жидким стеклом. После чего оба состава нужно перемеать и добавляют песок и керосин после чего просто доведите замазку до требуемой густоты.
| Substance | Parts |
| Sifted gypsum | 5 |
| Sifted lime | 0,2 |
| Fine sand | 2,3 |
| Wood resin | 2,4 |
| Liquid Glass | 0,1 |
| Kerosene | 0,5 |
Aquarium putty:
Rosin and wax are mixed and heated in an iron jar until a little foaming, stirring continuously, then the mixture must be cooled to about 50 ° C and add olive oil.
| Substance | Parts |
| 10 | |
| Beeswax (beeswax shavings) | 2 |
| Natural Olifa | rosin |
P.S.: I have tried to show and describe the tips. I hope that at least something will be useful to you. But this is not all that is possible to make up, so go ahead and read the site https://bip-mip.com/
